Ask Experts Questions for FREE Help !
Ask
    tkodlubo's Avatar
    tkodlubo Posts: 1, Reputation: 1
    New Member
     
    #1

    May 25, 2007, 06:00 AM
    Replacing a broken fuse
    I was trying to remove a fuse to determine which lights and outlets a particular fuse went to. Well when I tried to twist out the 15A fuse by unscrewing it, the fuse did not want to move. So I gripped with all my might, and twisted and the top of the fuse has broke of enough that it is no longer connectted securely with the threaded part of the fuse. So I am an amateur and do not want to correct this until I know exactly the correct and safe way to replace this fuse. I have only worked on homes in the past with a main circuit breaker where I could shut off all the power. I cannot see on this box if there is a main shut off switch. Can someone please explain the safe and correct way I can remove the old fuse with out getting my bbq'd. Thanks
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    May 25, 2007, 06:45 AM
    You may have 2 Pull Out Fuse holders, 1 for main, and 1 for range. Pull both out, Noting
    Position. Very everything out,(No lights or electricity)Have flashlight and fuse ready.
    Beyond repair?
    If Electrician gives high estimate for repair, may consiter converting to Breakers.
    Get at least second estimate

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing broken toilet supply line? [ 7 Answers ]

Hi! I'm an amateur DIYer and successfully fixed one of my leaking toilets. Unfortunately the other one required a new flush and fill valve, and even more unfortunately, after rebolting the tank back in and taking the flexible supply line in hand, it snapped off at the shut off valve! I've looked...

Blown Fuse [ 1 Answers ]

A brief background before the problem occurred. This morning I was caught in a traffic jam, wherein I had to idle the car for about 15 minutes. Thereafter the driving was normal until I stopped at a traffic signal for over 145 seconds. This time I had switched off the engine. I was unable to...

Fuse blown [ 6 Answers ]

My central ac unit upstair (Goodman-zone 2) keeps blowing its fuse. What troubleshooting can I do to resolve this issue.

Looking for a Fuse [ 1 Answers ]

Can't find this fuse anywhere. I've checked ACE Hardware, Radio Shack and several sites on the web. BUSS AGA 3A 125V This fuse is the standard 1/4'' dia and 9/16" long. Any help will be appreciated.

Thermal Fuse [ 3 Answers ]

I have a whirlpool le2500xtw1 dryer, I bought used.it worked fine for about a month, then one day it would run but not heat. First thing I did was get a new element. But the problem was the thermal fuse was blown. The replacement package had a new thermostat as well as the fuse. After a few days of...


View more questions Search