Ask Experts Questions for FREE Help !
Ask
    surf3860's Avatar
    surf3860 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    May 18, 2007, 05:37 AM
    A/C fan motor
    Hvac1000,

    I don't have the old motor, someone else started this.But, what I have is motor number p101as 1/4 hp 1075 rpm, contactor number ctr01152 40a 600v and capacitior number cpt00669 dual45/7 mfd 440v. Does this help you help me.

    Thanks,

    Surf 3860
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    May 18, 2007, 09:24 AM
    This does not help at all unless you tell me what you want help with.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fan Motor [ 9 Answers ]

Anyone know where I can find a fan motor for wood stove It is a Englands motor #7021-4784 Type U21 1/60th hp?

A/C fan motor [ 1 Answers ]

hvac1000, I believe the wiring is right now. But, the fan will only run for about five minutes and then shut down. The motor, contactor and capacitor are all new. The wires were close to The same, black black, brown brown and blue purple. Any ideal of what the problem May be would...

5-wire fan motor? [ 5 Answers ]

I have a Holmes Products Window Fan Model HAWF 2085T This model has two fans, two motors. These fans run 2 speeds, and are reversible for exauhst and intake. My question is how can wire one motor separate from the other, to just run at a single speed. I can control on/off with plug... ...

AC Fan Motor [ 4 Answers ]

What is the difference in the wiring for a 3 speed motor and a 4 speed motor? I'm having trouble with the reconnection of the new motor.

Ceiling fan with light kit on separate switches [ 1 Answers ]

I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...

View more questions Search