Ask Experts Questions for FREE Help !
Ask
    jacob1230's Avatar
    jacob1230 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2005, 04:17 PM
    My 91 ford rager w/2.3
    OK guys my? Is I put another used 2.3 in my ranger at first it ran OK then it went to running rough and backfireing I changed the coil packs that took the backfire away but it was still running rough then I stopped working on it for about a week went out yesterday and tried to start it but it would only crank over it sounded like it would try to fire every now and then if I can not get it running I'm going to convert it to a 302 if anyone has any tricks of that job please let me know on the easiest way thank you for any response mike
    CroCivic91's Avatar
    CroCivic91 Posts: 729, Reputation: 23
    Senior Member
    		  
    #2

    Apr 26, 2005, 11:38 PM
    Pleasenexttimewhenyouwritesomething-useadottoendyoursentencebecauseit'sapainintheassto readatextwithnodots.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My ford 2.3 in a 91 ranger [ 3 Answers ]

Hey guys my problem is that I just swaped out a 2.3 for another 2.3 and when it runs it idles fine for a little bit then it seems like starts to miss then boggs out and dies and back fires like a cannon so bad it blew a brand new muffler out of round it kind of seems like it gets a rich smell of...

My 91 ford rager w/2.3 [ 1 Answers ]

Well my? Is I can start my 2.3 but only will run for a few seconds then dies and back fires every time when it idles it sounds like it is bogged down no pressure iscoming out of tale pipe what so ever when it dies it puffs out white/blue color smoke after the backfire it also takes a few seconds to...

My 91 ford rager w/2.3 [ 2 Answers ]

Hi my 2.3 has 304,000.0 miles on it and it was running fine until three days ago . I drove it about 25 miles and pulled into drive and turn it off . When I went to start it back up it would only crank over like it had no fire to the plugs . So let it set about 5 minutes and then cranked it over...

View more questions Search