Ask Experts Questions for FREE Help !
Ask
    Bopper12's Avatar
    Bopper12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 14, 2007, 12:32 PM
    Instaling 2 shower heads/regulator
    I wanted to install 2 shower heads with independent controls for temperature on each side of my shower. 2 people could use the same shower and have their own shower head and setting. I would use the same hot/cold feed to split from, and was wondering if the pressure and/or temperature would be jeapardized since I am using the same supply.
    Any help would be appreciated.
    Thanks
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 14, 2007, 12:56 PM
    Quote Originally Posted by Bopper12
    I wanted to install 2 shower heads with independant controls for temperature on each side of my shower. 2 people could use the same shower and have their own shower head and setting. I would use the same hot/cold feed to split from, and was wondering if the pressure and/or temperature would be jeapardized since I am using the same supply.
    Any help would be appreciated.
    Thanks
    Your plan is to install two showers in one shower base. Correct? I would take each shower valve off a 3/4" branch and not a 1/2" one. This way will give you much better pressure. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

In Search of an in-wall diverter (two shower heads) [ 5 Answers ]

Hi there everyone, I'm remodeling my bathroom, and I've run into a problem. I'm using a standard setup for the bath with a dual handle manifold which uses a stop on the tub spigot to divert flow to the shower head, but I've made a decision that has put me at a stopping point. I've plumbed...

Installing multiple shower heads [ 1 Answers ]

I am in the middle of a bathroom renovation. I would like to install two shower heads. I am not sure what the best way to set this up. Can I use one set of valves to run both shower heads? Will the 1/2 inch copper lines allow enough water volume to pressurize both heads from one set of...

Removing shower heads and replacing them [ 1 Answers ]

I have an old shower head that needs to be replace but don't know how to go about doing it. It does not look like one that I can remove at the head of the shower but one that it looks like I would have to remove it from the base of the shower wall if that all makes sense. Help.

Two shower heads [ 1 Answers ]

New construction. I have a shower faucet (Danze, oil rubbed bronze) and an additional shower head (same brand and finish) that I want to add and have mounted from the ceiling of our shower enclosure.I want to switch from one head to the other. Need to rig some kind of valve or diverter for tidy...

Shower Heads [ 3 Answers ]

How Do I Remove The Flow Control System Off A Shower Head So The Pressure Comes Out Greater It's a Dual Shower Head If That Helps

View more questions Search