I wanted to install 2 shower heads with independent controls for temperature on each side of my shower. 2 people could use the same shower and have their own shower head and setting. I would use the same hot/cold feed to split from, and was wondering if the pressure and/or temperature would be jeapardized since I am using the same supply.
Any help would be appreciated.
Thanks

Quote:

---

Originally Posted by Bopper12

I wanted to install 2 shower heads with independant controls for temperature on each side of my shower. 2 people could use the same shower and have their own shower head and setting. I would use the same hot/cold feed to split from, and was wondering if the pressure and/or temperature would be jeapardized since I am using the same supply.
Any help would be appreciated.
Thanks

---

Your plan is to install two showers in one shower base. Correct? I would take each shower valve off a 3/4" branch and not a 1/2" one. This way will give you much better pressure. Good luck, Tom