Ask Experts Questions for FREE Help !
Ask
    guyhood's Avatar
    guyhood Posts: 15, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2007, 08:50 AM
    GFCIs required?
    I am wiring a 40' x 68' barn/shop, rated as residential with a 200 amp service.
    It is being used to store a couple of boats and trailers in the winter, with a shop to work in.
    Do all the receptacles in the building need to be GFCI protected?
    Thank you, Guy
    SoopaDuck's Avatar
    SoopaDuck Posts: 17, Reputation: 4
    New Member
    		  
    #2

    Apr 28, 2007, 09:34 AM
    I would think not, but the best thing to do would be to check your local code. Most decent sized cities now have that information online.
    Anthony_'s Avatar
    Anthony_ Posts: 38, Reputation: 1
    Junior Member
    		  
    #3

    Apr 28, 2007, 02:09 PM
    Garages, and also accessory buildings that have a floor located at or below grade level not intended as habitable rooms and limited to storage areas, work areas, and areas of similar use shall have GFCI protected receptacles.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Information required [ 4 Answers ]

My question is " How to know if a woman is aroused?" Or is she just faking it??

When is a permit required? [ 5 Answers ]

I'm located in Montgomery County, MD and am going to be doing some work in the basement. When is a permit required when working on plumbing? I plan on moving the shower drain and vent about a foot, and the toilet drain and vent about 4 inches. Do I even need a permit?

HELP required... budgets. [ 2 Answers ]

Hi, I would be really grateful if any one could help me. I need to perform a draft budget for a new job and they have requested a draft budget.. unfortunately never done one before... can anyone assist on how I can attack this? I would be really grateful! I just would like to know where to start...

Cassette to cd.. help required [ 2 Answers ]

Hi I am in the process of recording all my audio cassettes onto PC for burning on to cd eventually. I have no problems in getting the sound on to the PC, but I am having problems in 'cleaning up' this sound before I burn on to cd. I have Cool Edit Pro and Roxio Creator 7. Is there anyone out...

Driver required [ 1 Answers ]

Hi folks, Will any one help me getting driver for my pci multimedia audio device Which is named 82801db/dbl AC ' 97 audio controller , vendor intel corporation. I am using win 98 SE

View more questions Search