Ask Experts Questions for FREE Help !
Ask
    splace's Avatar
    splace Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2018, 07:29 AM
    Inproper flame
    Burners light properly but then become lazy and wants to roll out, gas pressure then drops to zero.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Apr 4, 2018, 09:09 AM
    Couple questions.. I assume this is a furnace.

    #1. How long between it lighting and going out?
    #2. Do you have any other gas appliances that are working well at this time. Stove water heater etc?
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #3

    Apr 4, 2018, 10:47 AM
    Make and model is helpful to look up components to trouble shoot. Do you have an error code? Furnaces are supposed to shutdown if you don't achieve full ignition within a set time. If it did not it would blow up. There are many components that facilitate this SAFE ignition, and firing of your burners.

    Do you have a manual that tells you where to find YOUR models error codes, or how to read them? Generally you will find them on the inside door of your furnace access panel.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace will start and light then the flame goes out. Clean flame sensor then works [ 1 Answers ]

Furnace will light then the flame goes out. I clean the flame sensor and then it works correctly for a while and have to repeat

Beckett burner starts has flame for about 15 seconds off for 12 then flame on & runs [ 7 Answers ]

I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...

Looking for old flame [ 1 Answers ]

I am anxious to find a person who I was engaged to in 1963.I only know her maiden name.please advise.

The Flame goes out [ 7 Answers ]

In the gas furnace, is it normal for the flame to ever go out when the fan is on?

No flame [ 3 Answers ]

I recently bought a home that's approximately 12 years old. The gas heater seems to be working fine, but no flame. I can smell gas, but it never shuts off unless I turn it off. A few months ago I had a similar problem where the sensor needed to be cleaned. The problem then was produce a...

View more questions Search