Ask Experts Questions for FREE Help !
Ask
    brucehoward's Avatar
    brucehoward Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 3, 2017, 08:30 PM
    Vulcan cx90 heater
    The thermostat probe on my Vulcan cx heater unit has dislodged after the unit was relocated. Could you please advise the correct position under the unit as my fan keeps cutting in and out on start up.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Jul 5, 2017, 04:09 AM
    Are you sure you don't mean thermocouple, or heat sensor? Picture would help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Vulcan Heater [ 3 Answers ]

I can't decide if this is a plumbing question or a heating and air conditioning question I have Vulcan gas heater, and the fan has stopped, no sign of a burnt out motor, just no fan. You would not think this is important except that the unit is designed to distribute heat through the use of a...

Vulcan CX90 furnace won't switch on [ 0 Answers ]

I've moved the thermostat to another location, in doing so I did not disconnect power to the unit and fear that I may have shorted some of the six wires and damaged a circuit board. I heard some relays engaging when I pulled the thermostat wires thought the wall. I've checked the thermostat with my...

Changing faulty Vulcan CX90 programmable thermostat [ 7 Answers ]

The programmable thermostat on our Vulcan CX90 ducted gas heating system has died. A gas plumber has checked out the furnace, which is working fine, but he was unable to replace the programmable thermostat as they are no longer available. Tradelink advise that it can be replaced by a Honeywell...

Vulcan CX90 [ 1 Answers ]

Wiring diagram

Vulcan CX90 and Honeywell Focus Pro 6000 [ 2 Answers ]

Hi, I'm trying to install a Honeywell Focus Pro 6000 controller to a Vulcan CX90 Ducted Heating Unit. There are 6 wires coming from the CX90 marked A,B,C,D,E & F. The wiring diagram for the CX90 is no help because all 6 wires disappear into a decoder unit. Can anyone offer any help on wiring...

View more questions Search