Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Weil Mclain Ultra II 230 Boiler
[ 25 Answers ]
I am considering a Ultra 230 boiler and in looking over the documentation I have three questions: 1. What the heck is a "condensing" boiler? 2. Will this boiler system work with cast iron radiators? 3. The piping diagram shows a 12" long connection atop the boiler between the input and...
Weil Mclain Ultra 230 PHd stopped working
[ 0 Answers ]
The boiler is not kicking on. But the display indicates 558 (5 is the status code, and 58 is the outlet water temperature)upon turning the switch on and pressing the reset button. The operator's manual is not providing any guidance to resolve the issue. Any one has any suggestions?
Weil mclain ultra 230 problems with display?
[ 0 Answers ]
I powered up the Weil-Mclain Ultra 230 that I installed, and the display was blue... but totally blank... What could be the cause of this ?
Weil mclain ultra boiler HARD LOCKOUT CODE 12
[ 0 Answers ]
My Weil Mclain Ultra 80 Boiler display shows a hard lockout code E12... Pressing the reset button does nothing... ie the display will not then change back to the normal standby or operating mode... Removing the thermostat wires and then jumpering the thermostat terminals 5 and 6 on the low...
Repeated Hard Lockouts with Weil-McLain Ultra 2
[ 1 Answers ]
I have a Weil-McLain Ultra Series 2 -155 Gas Fired Water boiler furnace that has been installed for about a year. It started with hard lockouts, code E18 occurring about once ever week or two. It has gradually gotten worse with soft lockout code b30 acting as a hard lockout and not resetting. ... View more questions Search
|