 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Weil Mclain Ultra 230 PHd stopped working
The boiler is not kicking on. But the display indicates 558 (5 is the status code, and 58 is the outlet water temperature)upon turning the switch on and pressing the reset button.
The operator's manual is not providing any guidance to resolve the issue. Any one has any suggestions? |
||||
Check out some similar questions!
Hey guys. If any of you have worked on or installed ultra boilers, what kind of luck have you had with them, and if you have had problems, what were they. Have you found draft inducers to be problematic? Any other problems you have encountered? If so, please let me know what you have found. ...
I am considering a Ultra 230 boiler and in looking over the documentation I have three questions: 1. What the heck is a "condensing" boiler? 2. Will this boiler system work with cast iron radiators? 3. The piping diagram shows a 12" long connection atop the boiler between the input and...
I powered up the Weil-Mclain Ultra 230 that I installed, and the display was blue... but totally blank... What could be the cause of this ?
I have power to my boiler because the fan is running, but no power to the electronics. So no firing, no sensing and no heat. Are there fuses in there that could be blown? Unit is 2 years old.
I have a Ultra 155 boiler with an indirect 40 gal DWH. 4 zones, plus prioritized domestic water Taco switching relay. The system uses 4 taco cartridge circulators for the four zones plus one for the DWH. It constantly goes off (at least once every other week in the winter) on a too much flow...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
