Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower Pan Question
[ 6 Answers ]
Can a plastic liner be installed over a lead pan? I try to do a lot of resarch on new building/restoration trends, and I happened to have stumbled upon this blog. I am rebuilding/remodeling a flooded home. Too bad I didn't see this before my "old time" plumber installed the lead pan. He was so...
Proper shower pan install utilizing exsting basement shower drain
[ 6 Answers ]
I am remodeling a basement bathroom. I demo'd the shower and its tile to reveal rotted framing. I believe this is due to an improper or (more likely) not existent shower pan -- there was no water proof membrane between the tile/thinset and the framing. Can I build a proper shower pan...
Shower Enclosure Question
[ 3 Answers ]
Thanks for the suggestion, I will try it. I have another question about the sheetrock with the showerbase I am trying to install. I found there is a gap (space) about 1/2" between wall stud and showerbase on both (left and right) sides after I lay down the shower base (or 1" on one sides)....
Shower Pan Question from a Newbie
[ 2 Answers ]
I have a shower that is tiled on three sides and has a fiberglass pan. The pan has peeled and has had 2 do it yourself paint jobs from Home Depot kits. It also has two cracks coming out from the drain about 5 inches long. I had a pro out to refinish it and he said that because of the extent of...
Shower Pan Replacement Question
[ 1 Answers ]
I am replacing an old shower pan with a fiberglass unit. I believe the old pan is acrylic. There is a large opening in the slab for the trap, approx 12" x 12". There will be no support for the part of the pan that's directly above this cutout. Is the fiberglass shower pan strong enough to not... View more questions Search
|