Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installed the shower pan and forgot to put in the shower drain first... oops!
[ 8 Answers ]
I have a 3x5 fiberglass pan installed (built in with framing on top of it) and no way to get the drain attached. Argh. Is there any way to deal with this without ripping out all this work?
Proper shower pan install utilizing exsting basement shower drain
[ 6 Answers ]
I am remodeling a basement bathroom. I demo'd the shower and its tile to reveal rotted framing. I believe this is due to an improper or (more likely) not existent shower pan -- there was no water proof membrane between the tile/thinset and the framing. Can I build a proper shower pan...
My shower drain is raised above the shower pan by 3/16" causing standing water
[ 2 Answers ]
I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...
Shower Pan Question from a Newbie
[ 2 Answers ]
I have a shower that is tiled on three sides and has a fiberglass pan. The pan has peeled and has had 2 do it yourself paint jobs from Home Depot kits. It also has two cracks coming out from the drain about 5 inches long. I had a pro out to refinish it and he said that because of the extent of...
Shower Pan Replacement Question
[ 1 Answers ]
I am replacing an old shower pan with a fiberglass unit. I believe the old pan is acrylic. There is a large opening in the slab for the trap, approx 12" x 12". There will be no support for the part of the pan that's directly above this cutout. Is the fiberglass shower pan strong enough to not... View more questions Search
|