Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kitchen faucet leaks from the bonnet (Kohler K-10412)
[ 15 Answers ]
I have a Kohler kitchen faucet that I bought at Home Depot and installed myself a few years ago. It is "Forte single-control kitchen sink faucet with sidespray and lever handle" (model number K-10412). The support page for this faucet is here: Kohler Plumbing Clicking on "Kitchen Faucets"...
How to remove the spout on Kohler 7865k kitchen faucet.
[ 1 Answers ]
Faucet is leaking black water around base. Have ordered 1003594 seal kit but am not sure how to get the spout out of its base, w/o damaging it to install the kit.
Bonnet nut on kohler 10412 kitchen faucet
[ 1 Answers ]
I am trying to remove the bonnet nut. The instructions say it is easy to do by just turning it counterclockwise. I cannot budge it. Any suggestions?
Kitchen faucet leaks from the bonnet (Kohler K-10412)
[ 5 Answers ]
Quoting terph8r: Use the schematic here: Kohler Plumbing The disassembly is pretty straightforward: 1. Remove the handle by exposing the allen socket in the back and unscrewing the screw that holds the handle in place. 2. Lift up part 1003662.
Remove Kohler K-15160 Kitchen Faucet
[ 2 Answers ]
I can't get this faucet off my sink. I've removed the two screws that hold the brass colored ring in place underneath. However, that ring will not come off even when I try to pry it off and it will not turn in either direction. From the top I'm unable to pull the faucet off even though it will turn... View more questions Search
|