Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I purchased a used 2006 bmw 325i and had problems one week later
[ 10 Answers ]
I purchased a used 2006 bmw 325i I put $5000 down on it and one week later had to spend $1800 in the car for work that needed to be done. I live in GA can I do anything to the dealership I bought the car from.
Bmw 520i starter motor removal
[ 1 Answers ]
Hi anyone know how to remove starter from 97 520i, have removed bolts, disconected wiring, its loose but will not come out . Any sugestions ta.Geoff
1993 cherokee ac clutch replacement tool discription
[ 0 Answers ]
1993cherokeeacclutchreplacementtooldescription
Honda Accord Crankshaft Holding Tool
[ 1 Answers ]
Does anyone have a drawing for a design of a tool to hold the crankshaft on a 1995 4cyl honda Accord? The crankshaft pulley has a 50 mm internal hexagon to put the tool in. A 3/4'' drive impact wrench wouldn't shift the nut so I had to drill it out.
Clutch Fan removal on 1999 Astro VAn
[ 1 Answers ]
Can anybody tell me if you turn the big nut clockwise or counter clockwise to remove the fan and clutch assembly from the water pump pulley shaft. Also any hits or tips on how to break this nut loose would be helpful.It is on there really tight and was wondering if it is a left hand thread. Have... View more questions Search
|