Ask Experts Questions for FREE Help !
Ask
    pkeohane's Avatar
    pkeohane Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2006, 08:29 PM
    Honda Accord Crankshaft Holding Tool
    Does anyone have a drawing for a design of a tool to hold the crankshaft on a 1995 4cyl honda Accord? The crankshaft pulley has a 50 mm internal hexagon to put the tool in. A 3/4'' drive impact wrench wouldn't shift the nut so I had to drill it out.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Nov 29, 2006, 08:56 PM
    Did you try Kroil or PB Blaster?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1986 Honda Accord LX/1996 Honda Accord LX [ 12 Answers ]

Would someone be able to tell me if the wheels on an 1986 Honda Accord are interchangeable with those of a 1996 Honda Accord. Thank you

Honda Accord [ 25 Answers ]

I am having problem with my Honda :( startes great from home , but as soon as I live from work approx 8hours later it does not want to start. Cranks and that's it. Nothing else. Mostly everything is new. Battery, wires, plugs, cap,rotor, timing belt,balancer belt, seals, water pump, intake...

Crankshaft Pully Bolt [ 5 Answers ]

Trying to loosen the crankshaft pulley bolt on a 87 Honda accord. Can't find away to hold the pulley and turn the bolt. Any help would be appreciated.

Honda Accord 94 LX [ 1 Answers ]

I am about to change my timing belt, balancer belt, & water pump. The crank bolt is loose (progress!). My crank pulley white mark is lined up with the pointer on the T-belt cover. The T-belt cover is now off. My concern: I can tell that the distributor rotor contact is barely pointing to # 1...

View more questions Search