Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need help changing a two wire light switch to a fan and light switch.
[ 3 Answers ]
Wall switch box has two black wires and two white wires(spliced. New switch has black wire, red wire(light),yellow wire(fan), and green wire(ground). I think I need an independent wire for the fan and light. How?
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
Wiring hunter fan and light /light to 3 way and fan to on off wall switch
[ 4 Answers ]
I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...
How to install a ceiling fan with a light and switch controlling the light and fan
[ 5 Answers ]
Hi, I've read so many posts, but can't figure this out. (don't laugh) At the switch: The wiring from the wall has RED, BLACK, and GROUND (bare). The switch is a dimmer for both the fan and light. Wires are BLUE, RED, and BLACK. SO, how do I hook this up? At the fan: The wiring from...
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ... View more questions Search
|