Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a light kit to ceiling fan w/ light & dimmer switch
[ 6 Answers ]
I would like to add a light kit to a ceiling fan(cannot find a name on it) that is currently hooked and working up in our family room - since we moved in 6 years ago (house was built in 1991). I would like this to operate like our bedroom ceiling fan (which already has a light attached) and...
Ceiling light install from a wall plug that is on/off switch
[ 9 Answers ]
I have a bedroom wall plug. There is switch that turns power off & on , on the lower plug. I want to be able to set the switch up to turn a new ceiling light on & off and just have the wall plug with permanent hydro. What is the best way to set this up.
Trying to install a Lutron Maestro Fan/Light dimmer switch with a CD52 ceiling fan
[ 2 Answers ]
Hey everyone, I'm trying to find the wiring diagram for my ceiling fan but I'm not having any luck, best I could find is this forum. I've got the lutron MA-LFQ-3 kit which has a fan control canopy module and a master/slave light/fan dimming combo. I have the fan apart and it has a molex...
Install ceiling fan light socket and fan switch
[ 1 Answers ]
I removed broken light switch pull chain only to find out light socket was also bad. Removed light socket and tried to replace. The old light socket had a wire in addition to the standard black and white. Can I use the standard light socket or do I need to find this socket with third wire? I hooked...
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ... View more questions Search
|