Ask Experts Questions for FREE Help !
Ask
    bob kane's Avatar
    bob kane Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 31, 2016, 03:35 PM
    Looking for a float for a model p185/65R14 PV grinder pump
    Looking for a vertical float replacement part for my pit viper grinder pump model P185/65R14. Do you have this part or know where I can get it?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Mar 31, 2016, 06:06 PM
    Hi Bob. We are not a supplier... we are a question/answer web page only. In terms of your question, you will do best to contact the manufacturer directly, OR contact your local plumbing supply wholesaler... they should be able to help you locate the exact part or a reasonable alternative!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

grinder pump issue [ 4 Answers ]

My grinder pump just started running continiously and I see a little water on top of tank . What could be wrong?

Basement grinder pump [ 1 Answers ]

I recently bought a house which is equipped with a grinder pump in the basement. It seems that when the grinder pump kicks off there is a loud bang that comes from inside the housing of the pump. I was told that it was a door inside the housing slamming shut. Is this normal? It is a violent slam...

Sewer Grinder Pump float [ 1 Answers ]

Greetings, My house has a grinder ejector pump in a 300 gal tank that ejects the sewage to the city drains a couple hundred feet away from my house. Lately the tank has been overflowing and when I open the tank and tap on the lower float, it will start to work. The lower float is larger than the...

Effluent pump or Grinder pump? [ 3 Answers ]

Hi all... First, here's the background info: We’re in the process of finishing our basement. Due to the lot being a walkout and the builder wanting to get down to bedrock the basement has 12' ceilings. Because of that, he chose to have the main sewer line exit the house about 4-5' up the...

Grinder Pump [ 7 Answers ]

Hello, My home is 10 years old and my sewer grinder pump located in the basement won't turn off. The only thing to drain into the basket for 9 years was the AC condensate and the water softner discharge. This year I finally hooked up a sink and toilet in the basement. All has been fine until...

View more questions Search