 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi, I have an unvented system, with no hot water, (unless I turn the immersion on).
Hi,
I have an unvented system, with no hot water, (unless I turn the immersion on). I have replaced the dual tank stat and the motorised valve. I've reset the boiler and the control unit (timer/programmer near the boiler). The central heating works normally. Please help! Thank you… Keith |
||||
Check out some similar questions!
Hi I have 2 tenants. They have the hot water on 2.5 hours in the morning, then go to have 2 very quick shoers in succession. The 2nd person's shower goes cold and they don't have time to put the bosst on in between showers as they're heading off to work. Should the hot water be sufficient for 2...
I fixed a rat eaten pipe had to do the usual stuff to get rid of airlocks,3bathrooms,2off this problem immersion/pump.I have used a wet vac got water out of pipes,I have opened up joints got air out of these also,but still after a minute of pumping water trickles off stops!I have done a lot of...
I have recently changed the thermostat in the immersion hot water tank. The water is heated twice a day through a timer. I have noticed that there is not hot water anymore. It starts fine, and then gets cool/cold after a short time. I can only find 1 heating element at the top of the tank. The...
Is there a way to vent to unvent my homes drain system without opening up walls
Is there a way to vent my unvented homes drain system without opening up walls
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
