 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
"I went to start my Honda HS35 Snowblower the other day and the recoil cord came untied and the cord came straight out. I think the recoil is fin, but I cannot seem to get the plastics covers off to get at the recoil. The top red plastic cover has four bolts and it should come right off, but I...
The starter cord came out after a couple pulls. It used to work great. Since the cord not broke there is sufficient cord to use the same cord. I have it all apart and see the spring tightens when I turn it toward the front of the machine. Where do I install the cord and how exactly does it get...
My son gave me an old Honda snowblower HS35. It was not running at the time. I took it apart, cleaned it out. The gas was jelly-like so I cleaned it out as best I could. Replaced spark plugs. Oil is clean. New filter. It will run for 5 minutes then shuts off by itself. I have taken it apart...
My Honda HS35 4 Stroke Snowblower won't work, it'll almost start, but won't. Have any ideas? Please help!! :(
Hi There; My hubby just picked up (literally) a decent looking blower. All of ours previously have been attached to tractors. I was wondering if anyone out there might have a manual they were no longer using or an unwanted spare manual to assist. He's good, but sometimes gets frustrated with...
View more questions Search
|
