Ask Experts Questions for FREE Help !
Ask
    drosen's Avatar
    drosen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2016, 10:10 AM
    How is the Symmons volume control valve TA-25B installed?
    The plumbers in this area are not familiar with Symmons products
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jan 12, 2016, 10:44 AM
    Hi drosen

    The plumber just needs to remove the old TA25b using an Allen wrench and a 1/4" lag bolt. Here, the lag bolt screws into the TA25b and then you pull on the lag bolt to remove the TA25b... grease up the oring on the new TA25b and push in to install the new one. Install the brass face with Allen wrench and all set.

    Good luck

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Symmons shower valve [ 1 Answers ]

My problem is the volume control does not work. (s96-1) The square protrusion on the control handle which slips into a black plastic part Does not move the black plastic part. The plastic part is stripped. Can this be replaced and how is it done?

What is the difference between Symmons TA-25A and TA-25B diverter spindle? [ 1 Answers ]

My problem is not enough hot water mix, even though the anti scaled adjustment is set to full hot. This diverter is within a tub spout shower mixer valve. What is the difference between Symmons TA-25A and TA-25B diverter spindle?

Why the check valve installed on the discharge, but not installed on Suction [ 2 Answers ]

Why the check valve installed on the discharge, but not installed on Suction?

Why is control valve installed in return side rather than supply side? [ 1 Answers ]

Why we prefer installing the control valve in the return side rather than installing it in the supply side in A/C units

View more questions Search