Ask Experts Questions for FREE Help !
Ask
    maximus43's Avatar
    maximus43 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 1, 2016, 07:38 PM
    EVCON furnace MODEL # G8T06012UHA11B
    Unit comes on and the heat distribution fan comes on (strange) but the forced vent fan does not, then the glow igniter comes on and stays on but gas valve never kicks in nor does the exhaust fan.. heat distribution fan keeps going like it's a warm furnace?

    The led on the panel lights red and stays red no flashes..

    I'm stumped
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jan 2, 2016, 11:07 PM
    Look at these manuals and get a meter: https://dl.dropboxusercontent.com/u/...%20manuals.zip
    https://dl.dropboxusercontent.com/u/...20Handbook.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    What you have sounds like a simple problem, as are all of them with these furnaces. All you need to do is to use a meter to find the problem. It could be as simple as the switch on the burner exhaust/combustion air fan.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Evcon propane furnace model dlas056bdd [ 2 Answers ]

I have a coleman evcon propane furnace model dlas056bdd 4 blinks means ? No heat why

Coleman evcon furnace model no. DGU10014UB troubleshooting [ 11 Answers ]

Coleman furnace referenced in subject line ignites, getting gas, blower starts, runs for a couple minutes, unit shuts down, red LED light on board blinks ten times. Anyone know the code for this repair? I'm FREEZING! :(

Evcon furnace Model # DGAAO56BDTBJ [ 0 Answers ]

Furnace burner will not always fire up, and blows cold air, sometimes it fires works fine for a few days, and then will come on and not fire up. Please help.

Colmen Evcon Furnace Model # DGAH056BBSA [ 19 Answers ]

I have attempted resetting the furnace a few times, each time it lights for about two seconds and then goes out. It repeats the process two more times after that but only without igniting. Then the diagnostic light starts flashing and remains flashing until reset. I know because I sat there and...

Coleman evcon furnace model # EB178 [ 3 Answers ]

When I turn the thermostat in the auto side nothing happens but when in the manual (ON) position the furnace works. What do you think my problem is. I replaced a blower relay that was humming but that didn't seem to do the trick.

View more questions Search