Ask Experts Questions for FREE Help !
Ask
    Jeffamy's Avatar
    Jeffamy Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 22, 2015, 07:09 PM
    Trying to wire my fuel oil furnace to run the blower without heat for my outdoor woo
    I'm trying to wire my fuel oil furnace to run the blower without heat for my outdoor wood stove
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Dec 22, 2015, 07:15 PM
    Your thermostat doesn't have a "fan" switch on it? Maybe if you put another thermostat on your system that does will make it easy without causing other problems.
    Jeffamy's Avatar
    Jeffamy Posts: 2, Reputation: 1
    New Member
     
    #3

    Dec 22, 2015, 07:50 PM
    Quote Originally Posted by smoothy View Post
    Your thermostat doesn't have a "fan" switch on it? Maybe if you put another thermostat on your system that does will make it easy without causing other problems.
    My furnace only has two spots for the thermostat
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #4

    Dec 23, 2015, 02:59 PM
    Thermostat doesn't have a Fan ON side? Otherwise use a single pole, double throw switch. Hot to the middle terminal, Switched one way the heater circuit is energized, thrown the other, only the fan. You will need a hot jumper to the fan only side.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #5

    Dec 23, 2015, 03:53 PM
    If your thermostat doesn't have a switch marked ON/AUTO it should be replaced with one that does for about $25

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace blower will run with the air on but won't run when switched to heat [ 2 Answers ]

My combustion air fan will kick on and burner will lite but fan will not kick on. When I put the termostat in cool the blower will kick on but won't in the heat setting. It doesn't matter if it is in auto or on position. Won't kick on in either

How often should oil furnace run with heat pump? [ 0 Answers ]

I have a Lennox X15 heat pump and due to the lower electrical cost on my dual energy plan, it appears to be saving me a fair bit of money, while also providing A/C in the summer months. However, this year, I feel that my oil furnace is kicking in more often than it did last winter (about once /...

Need wire digram for a concord fuel oil furnace [ 0 Answers ]

I have a concord fuel oil furnace I need to know the thermstat wires hook cause they are missing this is a used furnace and this part is missing

Blower won't run in auto for heat with oil furnace [ 9 Answers ]

I have an oil furnace. A/C works fine. Heat last season worked fine. Started up furnace this year just fine. But blower would not start on auto. The blower will run in heat mode when set to On. I replaced the Limit Switch in the Plenum. No change.


View more questions Search