Ask Experts Questions for FREE Help !
Ask
    HL138's Avatar
    HL138 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2015, 10:20 PM
    American Standard Ultra Valve
    Looking for help finding replacement parts for American Standard Ultra Valve. In particular, looking for replacement temperature control panel. Previous thread by Dithermaster said he was able to construct his own circuit board /microcontroller. If anyone has the schematics for wiring diagram of the control panel, I would appreciate it.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Dec 9, 2015, 10:53 AM
    I suggest you call American Standard directly. They will be able to direct you to the distributor who carries your part.
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leaking American Standard valve stem [ 2 Answers ]

I have a new American Standard valve stem that is leaking from around the central shaft (in case my attached image doesn't work, see http://neilnowatzki.com/graphics/plumbing/valveStem.jpg). It leaks when the valve is partially open, but not when fully closed or fully open. No water leaks from the...

American Standard Shower Valve [ 10 Answers ]

I have a single lever (actually a rotating knob) American Standard valve. It's stuck so that it doesn't allow any hot water (cold is fine) to pass. Last time this happened (that was about a year ago -- this particlar shower doesn't get used much), the plumber removed the face plate, took out a...

American standard cas valve will not open [ 0 Answers ]

American standard shower valve [ 1 Answers ]

Hi, I installed a american standard shower valve in my shower and I hooked up the hot and cold supply lines backwards. Is there and easy fix to this I really don't want to cut a hole in the back of my wall to fix this. Thanks Stancy

American standard shower valve [ 2 Answers ]

I Have an old American Standard one handle shower only valve (approx 40 yrs old). I bought a repair kit from a plumbing parts store consisting of valve seats, o-rings compresto install the repair kit?sion springs, etc. Can I gain access to the valve from the shower, or do I have to cut a hole in...

View more questions Search