Ask Experts Questions for FREE Help !
Ask
    hallworld's Avatar
    hallworld Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 2, 2009, 10:16 AM
    American standard shower valve
    Hi, I installed a american standard shower valve in my shower and I hooked up the hot and cold supply lines backwards. Is there and easy fix to this I really don't want to cut a hole in the back of my wall to fix this.
    Thanks Stancy
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    May 3, 2009, 08:29 PM

    Hello Stancy,

    The easy way is just leave it as it is and get used to it, other wise you would need to cut a cut a hole in the back of the wall to fix this, good luck.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

American Standard Shower Valve [ 10 Answers ]

I have a single lever (actually a rotating knob) American Standard valve. It's stuck so that it doesn't allow any hot water (cold is fine) to pass. Last time this happened (that was about a year ago -- this particlar shower doesn't get used much), the plumber removed the face plate, took out a...

American Standard shower valve leaking [ 1 Answers ]

Replaced Amer Std "ultramix+ bath and shower cartridge" (051337-0070A.) Had lubed washers, reassembled with care & still leaking about 5-6 gallon per day, same as before, more drips when water is turned on and off in same plumbing run. THANKS!

American standard shower valve [ 2 Answers ]

I Have an old American Standard one handle shower only valve (approx 40 yrs old). I bought a repair kit from a plumbing parts store consisting of valve seats, o-rings compresto install the repair kit?sion springs, etc. Can I gain access to the valve from the shower, or do I have to cut a hole in...

Shower Drip - American Standard [ 2 Answers ]

I have an American Standard Reliant + shower head that drips. Have replaced the cartridge & still dripping. Actually water is slowly coming out of the pressure balancing unit even when the water line is shut off. Do I need a new pressure balancing unit? What are the check stops for (one on each...

American Standard - dripping from shower head [ 5 Answers ]

Hi, I have a problem with water dripping from my shower head. I have American Standard hardware with a single lever knob (shower only, no tub). I installed a new cartridge 023529-0070A but that has not fixed the problem. My house is only 4 years old. I'm not a skilled DIY type but this...

View more questions Search