Ask Experts Questions for FREE Help !
Ask
    wolly38's Avatar
    wolly38 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2015, 08:01 PM
    Fan motor doesn't start
    Changed batteries in thermostat, now Modine heater purge fan starts, burner starts and fan does not. Fan turns freely and did run once. Could this be the control board?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Nov 26, 2015, 02:18 PM
    Try reprogramming thermostat. Try another battery or set of batteries.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you wire a hvac fan motor that doesn't require a capacitor [ 4 Answers ]

I replaced the fan motor on the condensing unit. The motor says it does not require a capacitor. When I install the fan wire into the existing capacitor the fan runs continuously. Can the capacitor be eliminated?

'97 toyota tercel won't start it turns the motor over but doesn't want to start? [ 3 Answers ]

I have checked fuel pump and changed spark plugs. I have know idea why it won't start or is hard to get started. When it does finally start it runs great so I think that would rule out the timing belt. If you have any suggestions I would appreciate it.

Furnace dcblower motor doesn't start in a cooling mode [ 0 Answers ]

How do I trouble shoot a dc furnace blower?

Furnace dcblower motor doesn't start in a cooling mode [ 0 Answers ]

Furnace dc blower does not turn on at all . How do I trouble shoot it?

Preblower motor doesn't want to start on my luxair furnace [ 1 Answers ]

Preblower on my luxair gas furnace doesn't want to start

View more questions Search