Ask Experts Questions for FREE Help !
Ask
    Sheywood's Avatar
    Sheywood Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2015, 08:59 AM
    Kenmore 665.17463300 dishwasher. Heating coil on 24/7, how can I get it to turn off?
    Just replaced the control panel cover yesterday. Pegs holding the face on were broken. No new parts other than the plastic cover. Now the heating ring on the inside heats whenever the door is fully closed. Even when the dishwasher is sitting, not on. What can I do to fix this. I tried to reset it by, 1. turning the power source, breaker, off for 30 minutes. 2. Pressing "Sani Rinse" and then "Air Dry" back and forth 3 times. This cause all the lights to flash, but the heat ring on the bottom was still heating. I can still run the washer OK, but I'm afraid that it might start a fire if I accidentally close the door all the way. Please help.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 14, 2015, 10:08 AM
    You have a dead short from how you put it back together. You need to take it apart and fix it before it will work. Here are some manuals: https://dl.dropboxusercontent.com/u/...ishwashers.zip
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...20Handbook.pdf
    Get a meter so you can check it, too. Apparently, something is either pressing on a wire or connection when the door closes or is shorted to the wire coming from the door switch.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dishwasher (Mod# 665 13213K901) will NOT turn on. [ 0 Answers ]

My dishwasher will NOT turn on. All of the lights work when pressed, but when I press the "Start/Resume" button nothing happens. It won't turn on. I tried a diagnostic (heated dry/normal wash/heated dry/normal wash sequence). After two minutes I hit "cancel/drain", but I still have the same...

KENMORE ELITE dishwasher MOD 665.13922k010 will not turn on [ 1 Answers ]

My Kenmore Elite dishwasher will not turn on, not lights will respond on panel. Power to dishwasher is good. I tried some of the suggestions of others to reset it with no luck.

I have a kenmore 665 dishwasher. There is no display and will not turn on. [ 0 Answers ]

I tried the breaker and that is fine. Is there a reset on it somewhere?

Kenmore Dishwasher Won't Turn On 665-13733K604 [ 0 Answers ]

I have a Kenmore Elite Dishwasher Model 665-13733K604. Was working fine, then next load just won't turn on. Will occasionally light up smart wash, heated dry, and blinks on normal, will let me cancel those lights but will not turn on. The overfill float moves up and down freely and I don't see any...

View more questions Search