 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cooling Issue/two way dampener
I have a two way heating/cooking system with a honeywell direct coupled actuator ml6161A2009. My upstairs is not cooling. The actuator itself appears to be working, I can see it and hear it actuate, however, I don't think it is. What should the indicator read when it is open or better, what position should the two indicators be at when it is working correctly? The one is a degree indicator, 15-90 degrees it looks like.
|
||||
Check out some similar questions!
When preparing for a long road trip, I had the 2001 Sequoia idling to provide electrical power. Since it was about 105 F outside, I ran the engine a bit faster than just idle in hopes of increasing cooling (a dumb idea, I suspect, since the fan is electric so it wouldn't have increased the...
I have a kenmore 3 ton 14 series unit. At night it cools good but day time it goes to 80 degrees. The compressor had a leak so the service man filled it up. Wasn't the service man suppose to change the dryer on it? The hose outside is not even cold and in the house it blows a little cool air but...
Hi! I have a 1995 Dodge RAM 2500HD with a V-10 engine with whatever the best cooling package was at the time. For years, the temperature gauge sat around the second mark (pointing at about 10 O'clock) no matter what I was doing with the truck. It could be 110 degrees out, pulling a loaded...
I have a Maytag zigzag fridge freezer. It has 2 problems - wondering if anyone has the same issues, or can help! Firstly, it regulalry makes a very loud clicking noise for about 5-10 minutes at a time, 4-5 times per day. Secondly, with the fridge-freezer on its warmest setting, the freezer...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
