Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pvc foam core pipe vs solid pvc pipe
[ 1 Answers ]
We need to install a waste water supply line for the 14 floor building and it's each floor have 8 bathroom and 4 kitchen. We have two option now one is solid pvc pipe and second one is Foam Core PVC pipe made as per ASTM f-891 schedule 40.
Does older PVC pipe fit with newer PVC pipe
[ 6 Answers ]
I need to replace the piping underneath my sink and the union I bought does not thread up with the old existing part. If I use a new 1 1/2" coupling, will it fit snuggly with the old existing 1 1/2" pipe or have the sizes changed over the years. I will have to cut the pipe and install a coupling...
Burned pvc pipe in domestic water well
[ 3 Answers ]
We had a submersable pump run dry and catch fire in our domestic water well, The pump is stuck at 115 ' and the suggestion is to grind the pump and plastic liner out with a rotary well driller. What is the safety factor, i.e.. Burned pvc pipe, etc being left over in the well?
Adding more water pressure to PVC pipe
[ 9 Answers ]
I have a home with well water and I have less than ideal water pressure. Are there any special precautions concerning increasing pressure from the current 30/50 to 50/70 in a home with PVC type pipes? I am worried this might overstress the joints. Thanks
Locating buried PVC water pipe
[ 9 Answers ]
What is the easiest way to locate a buried PVC water pipe running from the main house to a detached garage? No pipe location is shown on the house plans so I am assuming that it was added after construction was finished. I've already dug up half the yard trying to find a broken pipe and have... View more questions Search
|