Ask Experts Questions for FREE Help !
Ask
    billy 2's Avatar
    billy 2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 3, 2015, 07:03 AM
    I need the 2 drums that sanding belt rides on #103.0803
    I am looking for are the two round drums that the sanding belt rides on at either end of the 6" belt sander Model #103.0803. I don't know what year it is, but it is an older model. When I start the belt sander you can hear a loud clicking noise while it is running. I started to look for the problem and found that the inserts that are in each end of the drum are loose. I feel at this point it is dangerous to use and want to replace those drums. Thanks, Bill
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Mar 3, 2015, 08:16 AM
    Review this post.
    https://www.askmehelpdesk.com/tools-...ts-465141.html
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Mar 3, 2015, 12:24 PM
    If you look at "Check out some similar questions", you will note that parts are no longer available from Sears. Looks like brass bushings or maybe "oilite" was used. A very good Ace hardware store or possibly on-line could help you.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #4

    Mar 3, 2015, 01:48 PM
    Found this on eBay, hope it helps.

    Craftsman 103 0803 6" Belt Disc Sander Owner's Parts Manual 0789 | eBay
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman belt disk sander 103.0803 [ 8 Answers ]

I recently picked up one of these Craftsmen belt/disk sanders. It appears to be in very good condition although it has been sitting up for a long time and has a lot of surface grime and oxidation. 1) Are sanding belts still available (6" x 23"?) ? And 9" disc 2) What's the best way to clean...

I have craftsman Sears belt sander, model #103.0803 and I need parts [ 3 Answers ]

I have a Sears Craftsmen belt disk sander model #103.0803. I can no longer get parts from Sears because it is too old. I need an adjustable table for the disc sander and the brass bushing that goes on the end of one of the rollers. Can someone help me. I think it was bought in the 1940's or...

The drums [ 1 Answers ]

Hi yesterday I decided that I would go out and rent a part of a drum set and set up a lesson. My lesson is Monday but last night I tried to make just a simple beat and I wasn't very good. Should I consider saving my money and not going since I don't have very good rhythm?

Drums sounds [ 3 Answers ]

Hey Guys! I want to know what is the title/name of the sound of the snire drum used in the time of awardings? The sound of the drums that is heard when calling who will be the winner? The rumbling sound. . Tell me the name & if ever posible, where can I download it free? If not, even just I can...

Gorilla on the drums (uk) [ 5 Answers ]

Great advert, but what has a gorilla playing the drums got to do with cadbury's chocolate?

View more questions Search