Ask Experts Questions for FREE Help !
Ask
    blackmug's Avatar
    blackmug Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 19, 2015, 10:20 PM
    Heat temp
    How many joules of heat are required to heat 183g of aluminum with a specific heat of 0.900 from 59.0c to 76.5c
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Feb 20, 2015, 08:00 AM
    Heat (Q): is measured in Joules,
    Mass (m): measured in grams,
    Specific Heat Capacity (c): measured in J/ g *C
    Temperature change (T): measured in C

    so Q = ( m ) * ( c ) * ( T )
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I reset the temp range for max heat or min temp on cool [ 0 Answers ]

My thermostat is set to max temp of 76f for heat and 78f for cool. How do I change these limits?

Heat Pump Aux Heat displays first when heat comes on even when the outside temp is 50 [ 1 Answers ]

I have a Maytag 1200 Series; 13 Seer heat pump. Was just installed on 1/22/14. Also have a new Honeywell VisionPRO Series with RedLINK thermostat. Questioned my Kwhr usage; so I observed how it operated over the last few days; 1/21 through 1/22/14. I live in Belews Creek, NC . We have had...

Rite temp 8030c heat and heat 2 [ 2 Answers ]

I have a rite temp 8030c thermostat and when the heat is on the display blinks heat and then after sometime the display blinks heat 2. from what it seems, heat 2 does not warm the house quick enough. I turned the unit off/reset it, and at first the heat would be on blinking and then the display...

Trane heat pump fan continues to run when temp set is reached shuts off if lowr temp [ 0 Answers ]

When on heat and temp set is reached the fan continues to run cold air. Fan will shut off if temp set is lowered 2 degrees. Heat pump is Trane, thermostat is digital white rogers . A similar system, less BTU, shuts off when temp reached.

Heat not kicking on until the temp dips below 64 degrees, target temp set to 72 [ 2 Answers ]

Hello, This is my first time posting here, but I figured it was a good place to start for some advice. I just bought a new townhouse a few weeks ago and have been having some heating issues since moving in. The actual furnace (Goodman GMS 8045) was installed in June of '06 while the unit was...

View more questions Search