Ask Experts Questions for FREE Help !
Ask
    abrardds's Avatar
    abrardds Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2010, 02:19 PM
    Rite temp 8030c heat and heat 2
    I have a rite temp 8030c thermostat and when the heat is on the display blinks heat and then after sometime the display blinks heat 2. from what it seems, heat 2 does not warm the house quick enough. I turned the unit off/reset it, and at first the heat would be on blinking and then the display blinks heat 2. do I have a problem with the thermostat or furnace. I really do not know much about this stuff.
    jmnicho4's Avatar
    jmnicho4 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jan 24, 2011, 07:17 AM
    I have the same model Rite Temp and I'm having the same issue right now. We live in Chicago and the temps have been getting near zero at night. Did you find a solution to the "Heat 2" problem? I've done the same things you explained (turning it off, resetting) and it doesn't work. We have our heat set to 69 degrees but the heat doesn't kick on after the house reaches 64degrees. Kind of strange and a little chilly! If you have any answers, I'd love to hear them. I can't seem to find any solutions in the troubleshooting for RiteTemp!
    Thanks, Jill
    realkuttan's Avatar
    realkuttan Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Feb 26, 2011, 10:32 AM
    Exactly the same problem...

    I too have a rite temp 8030c thermostat and when the heat is on the display blinks heat and then after sometime the display blinks heat 2. My furnace does not have a second stage... heat 2 just shuts the furnace off..

    I was hoping to find an answer, what we seem to have here are more of us with the same problem.. Hope somneone chimes in...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat Pump blows 5amp fuse when switching between defrost & back to heat. Them Heat work [ 3 Answers ]

I have a Carrier Heat Pump System. It’s about 5 years old and has functioned OK until this Christmas Eve. One problem is the condensing unit is not kicking back on after it goes into defrost mode. I found a 5AMP fuse blown in the attic unit and once replaced it functioned. At least for a day or two...

Rite temp thermostat wiring [ 2 Answers ]

I have an electric forced air furnace. The thermostat was not kicking on in the auto position. Had to put it in manual fan to get heat. Occasionally it would work in the auto position. Finally had an electrician replace it with a Rite Temp 6025 thermostat. It worked well for a week. Now...

Trane heat pump /rite temp thermo [ 1 Answers ]

Heat auto shutoff won't work. Just put rite-temp thermo on. C w2 rc o b rh w y g a Bl o r w/b y g There is a jumper between rc and rh. Rite temp 8050C. Please help me.

Heat not kicking on until the temp dips below 64 degrees, target temp set to 72 [ 2 Answers ]

Hello, This is my first time posting here, but I figured it was a good place to start for some advice. I just bought a new townhouse a few weeks ago and have been having some heating issues since moving in. The actual furnace (Goodman GMS 8045) was installed in June of '06 while the unit was...

Rite Temp digitial thermostat [ 1 Answers ]

Why does my digital display show the word 'filter". I just changed the filter about 2 weeks ago.

View more questions Search