Ask Experts Questions for FREE Help !
Ask
    david jeffery's Avatar
    david jeffery Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2015, 02:09 AM
    Power issue to downlight
    Hi guys,

    I have been insulating my roof and removed the down light cable from a clipsal 413np plug to plug a vacuum in. The vac worked for a couple of seconds before stopping, I re-plugged the downlight back in (2 on the one switch) and they flickered before they stopped working. I then plugged one down light into a power lead and it worked. Does the 413NP plug have a hidden fuse? All other electrics still work .

    I appreciate any advise you can give.

    Thanks Dave
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jan 31, 2015, 07:06 AM
    I would help to tell us your location. Most here are in the US but there are folks who can help if you are not, which I assume.
    david jeffery's Avatar
    david jeffery Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 31, 2015, 03:31 PM
    Hi Stan,

    Thanks for replying, I am in Queensland Australia.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power of attorney issue [ 20 Answers ]

Can I change locks on a condo that I own without the other person who has power of attorney with the other owner knowing it? The other person who has power of attorney and I don't get along.

WD-62725 Power issue [ 0 Answers ]

I have a Mitsubishi WD-62725 & my issue is I'm getting no power to the lamp & fans by the lamp. I had the BGLOD issue but I replaced all the 1000uf 16v caps on all boards & that fixed the BGLOD but now there's the issue of finding out why there's no power getting to the lamp. I plan on doing a...

LX178 Power Issue [ 1 Answers ]

I have a LX178 with the Kawaski 15 hp liquid cool, my problem is after I have started to mow for just a little bit my engine gets to the point where it wants to die. So I turn off the blades and choke it a little and then my RPM's go back up where I can turn the blades back on again only to have...

Harbor Breeze Downlight Issue [ 3 Answers ]

I wish I had read the FAQ on forum before buying my Harbor Breeze fans. I grew up with Hunter but liked the style of the Harbor Breezes and assumed the quality would be good enough. We have two Harbor Breeze fans with the same problem. Both are remote-only fans, and both have the separate...

View more questions Search