Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Where can I get a diverter cover for 7 yr. Old Moen chrome kitchen faucet
[ 2 Answers ]
The decorative cap that covers the access to the diverter, and sits at the base of the handle of our 7 yr. old chrome faucet, has a broken tab that helps it seat firmly. Without the tab the only way to keep the thing on is to glue it. That is only temporary and doesn't look too nice either. ...
Diverter valve kitchen faucet
[ 3 Answers ]
I had low pressure in both hot and cold with a lot of pressure in spray nozzel. I replaced thediverter valve pressure in hot and cold much better, however when I use the spray it has low pressure and does not shut the faucet off. How do you adjust the screw on the diverter? Clockwise or...
Kitchen faucet diverter valve
[ 1 Answers ]
OK here's the problem. I have a thumping noise when I turn on my kitchen sink. It has a sprayer. Use the sprayer and no noise. Yesterday I installed a new diverter for sprayer. It worked great for a few hours. No thumping at all. Then the noise started again. This morning I took the diverter out...
Kitchen Faucet Spray Diverter
[ 1 Answers ]
My kitchen faucet spray did not work when I moved into my house. I have replaced the faucet, spray hose assembly and also the diverter with new. I have removed the spray from the hose and turned on the water. Water flows out of the faucet and the hose, so there is not blockage. When I put the...
Kitchen Faucet Diverter Installation
[ 1 Answers ]
We recently installed a new Corrego Kitchen Faucet Model #F87B4500BNC, and found we had very low pressure, so we called the company and they said that we needed a diverter so they mailed it to us. No instructions came with the diverter, so we need to know where and how to install the diverter. ... View more questions Search
|