Ask Experts Questions for FREE Help !
Ask
    2nd2nun's Avatar
    2nd2nun Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2015, 09:08 AM
    How to remove motor pulley Maytag Dryer pygt344aww
    The motor pulley broke and I need a way to remove please hep
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jan 7, 2015, 09:34 AM
    Hi 2nd2nun and welcome, I think that pulley will thread on and off.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #3

    Jan 7, 2015, 11:22 AM
    Is this your part?

    Maytag Laundry Motor & drive Parts | Model PYGT344AWW | SearsPartsDirect
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Jan 8, 2015, 07:56 AM
    The threads are usually left-hand and there is a hole through the motor where you use a Phillips-head screwdriver to lock the shaft from turning.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag dryer motor squeaks [ 2 Answers ]

My dryer was making a terrible squealing screaming noise. When I disassembled the Maytag Model LDE7304ACE dryer and took off the front blower wheel and belt, I was able to turn the motor by hand. It wants to squeak intermittently. Can I lubricate the bearings (and how) or what can I do from...

How do I remove the front panel of my maytag mdg7600aww dryer? [ 0 Answers ]

The clips do not seem like they will release on one side of the unit

Maytag Performa dryer --how to remove temperature control switch [ 0 Answers ]

I have a Maytag Performa electric dryer that needs a new temperature control switch. I am talking specifically about the device that is behind the knob on the front panel that one dials to change the heat settings (high, medium, low, no heat). I am not talking about the knob.I am talking about...

Maytag dryer motor or bearing lube needed? [ 2 Answers ]

I have a mid 80s maytag dryer, very low usage, with those single center knob controls. From previous questions and answers I have sen on a related issue, I have determined the motor is the problem, this is why: when you try and start it , the motor groans but does not start, if you keep pushing...

View more questions Search