 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
V wire on Rheem thermostat
I have a Rheem thermostat (model tst411mdms). I would like to install a wifi thermostat and I have not found one that has the v wire terminal. The v wire designation is for PWM output (Pulse Width Modulation). Do any of the wifi thermostats have this wire and do I need it? All the terminals on a Honeywell th9320wf5003 work except for the v and remote temp sensor, which I don't need.
|
||||
|
||||
|
This site may be some help. Pulse Width Modulation
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
replacing old rheem with new honeywell. old wiring is green, red, blue, yellow, w2 screwtrapped to e screw and tan to x screw. new thermosat has L, Aux/E, G, R/C, O/B, Y, R/C? how do they exchange? This is a heat pump.
2 wire heat thermostat and 2 wire air thermostat want to wire both to a programmable thermostat, need wiring information
I have an old White-Rogers thermostat with only 4 wires coming out of the wall and need to replace it but the only new ones I find (at Home Depot) have 5 wires. How do I hook up a 5 wire thermostat to 4 wires and still have it work properly? Big John
I have the following information. I have a Yellow wire to Y terminal Orange to B terminal Blue to C terminal Red to R...
View more questions Search
|
