 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
DW 665.160324 doesn't start,
Whirlpool (Kenmore) Model 665.16032400 dishwasher won't start, button doesn't light and is unresponsive. Door latch relays has continuity. Thermal fuse has continuity if test while in wiring harness is valid.
Cancel light switch switches on/off with 4 see hold and the Normal Cycle light switch stays on regardless. Reset attempts leave the start lamp unlit and button start unresponsive. How might I test for mother board/ timer vs. control panel replacement? |
||||
Check out some similar questions!
7 year old kenmore dishwasher will not start. We have tried the reset sequence (hiTemp wash-Air dry) and got all the lights to come on, but 1) we can not hit cancel to stop it, and 2) if we just let it run through its sequence, it does the drain cycle sounds with an odd set of lights on (washing,...
Will not repsond to touch pad commands. Did Normal Wash - Heated Dry diagnostics, but it didn't run according to instruction sheet I found behind kick panel. Replaced Control board with no results. Called out appliance tech who recommended touch pad replacement. I've read water temp issues may...
Hi there, I have a kenomore elite Dishwasher (ultrawash, quiet Guard4) that will not wash. It fills with water but when it comes to washing, it just won't jump to that cycle. I have tried the Reset but that doesn't make a difference. Any other options to try before I call for a repair service?...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
