Ask Experts Questions for FREE Help !
Ask
    PastorPeg4's Avatar
    PastorPeg4 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2014, 10:11 AM
    My goodman furnace has begun to roar like a large farm tractor.
    My goodman furnace has begun to roar like a large farm tractor when it starts and shuts off. It seems to be running and heating properly. Could this be too much gas pressure?
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Nov 5, 2014, 10:25 AM
    Probably not a gas issue. Might be a blower problem.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Nov 5, 2014, 07:32 PM
    Remove your air filter and tell us if the noise goes away.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Nov 6, 2014, 09:59 AM
    Make sure the blower cage isn't hitting the enclosure. Some Goodman units have Chinese motors with mounting brackets that I have seen broken off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GMH8 goodman furnace won't stay lit. The furnace lights for about 2 seconds [ 2 Answers ]

I have a Goodman Furnace GMH8 that is 4 years old and has been working fine but today it will not stay lit. The furnace lights for about 2 seconds and then goes out. The blower comes on and will continue to run as the furnace lights and then goes out several times before shutting off.

Goodman furnace with 3 blinking lights and furnace has flame roll back [ 7 Answers ]

I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great

My Goodman GMP050 furnace's igniter won't shut off after the furnace cycles. Why? [ 0 Answers ]

On my 15 yr old Goodman GMP050, the preigniter stays hot orange even after the furnace cycles properly. I've sanded the flame sensor and the igniter but it still stays on till I shut off the electricity at the furnace. Any thoughts? It's COOOOOOLLLLLLDDDDDDDDD!

New furnace makes "roar" noise on ignition/start of blower [ 5 Answers ]

The furnace is 4 months old, in a trailer. Two days ago, I thought I heard metal clanking, like something falling. Since then, the furnace "roars" like a fireplace on initiation of the fan- after I hear the ignition kick in. It was only occasionally, but has become more regular, now. Thank you.

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

View more questions Search