 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Looking for advice on how to troubleshoot a heat issue. I have a 2 story home and cannot get heat to the 2nd story anymore. I opened the pipe on a 1st floor run to swap a panel radiator in the kitchen for one of the slant fins. After closing and refilling the system I cannot get hot water to flow...
I'm having a problem with getting enough heat in the back bedroom. I have baseboard heat, with hot water. I have bled the system and checked the circulating pump wich are fine, it is a single zone system. The only problem is that back bedroom, Is 1/25 hp for a pump OK? And is the pump on the return...
I have a 2000w baseboard on a double pole thermostat. It wasn't providing enough heat for the room size so I installed an additional 1500w on another wall. I wired it to the to the main baseboard opposite end from where it is wired to the thermostat with #12 with run of about 16'. They are both...
I installed a new Peerless hot water boiler. Have a single zone system which now provides plenty of heat to lower half of house, the upstairs bedrooms of this split level house has no heat. I installed a bleeder valve in one of the bedroom base boards and bled the system there until water started...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
