Get no action when turning my furnace on

DisabledSeabee Posts: 2, Reputation: 1

New Member

Sep 23, 2014, 10:04 AM

Get no action when turning my furnace on

I have a Bryant heater that is not working

bitters Posts: 348, Reputation: 12

Full Member

Sep 23, 2014, 10:23 AM

Check the fuse on the circuit board in the blower compartment.

Add your answer here.

Check out some similar questions!

Furnace turning itself off? [ 1 Answers ]

Our forced air gas furnace has an electrical pilot light and an electronic thermostat. Twice in the past month, I have realized it isn't blowing and have gone down and flipped the little light switch off, waited for the system to go silent, then flipped it back on and had the furnace come back to...

Furnace turning itself off? [ 0 Answers ]

Our forced air gas furnace has an electrical pilot light, I'm pretty sure. Twice in the past month, I have realized it isn't blowing and have gone down and flipped the little light switch off, waited for the system to go silent, then flipped it back on and had the furnace come back to life, blow...

Furnace not turning on. [ 0 Answers ]

I just lit my pilot light and is running fine, but furnace won't kick on when thermostat is engaged. I just installed a new fan limit switch(Honeywell) and the blower works fine. Furnace is a GE model no. 21LU100A2A and thermostat is model 3AHT10B1A2, 30 volts AC, 2.0 amp.

Furnace not turning on [ 3 Answers ]

My heater furnace is not turning on. The fan turns on and the outside compressor is on, but it only blows cold air.

Tempstar furnace ,delayed blower action [ 2 Answers ]

Sears #867-769426 High effience unit Blower comes on after 5 to 6 minutes!after flames go on ! What can I do I changed the Limitcontrol and set it at 250 degrees and is still doing the same ! Al