Ask Experts Questions for FREE Help !
Ask
    alimon's Avatar
    alimon Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 21, 2009, 02:13 PM
    Furnace not turning on
    My heater furnace is not turning on. The fan turns on and the outside compressor is on, but it only blows cold air.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #2

    Nov 21, 2009, 02:27 PM
    Brand/model#?
    alimon's Avatar
    alimon Posts: 2, Reputation: 1
    New Member
     
    #3

    Nov 21, 2009, 02:47 PM
    Furnace is Goodman, Model #HCA100ND4R

    Compressor is Luxaire, Model #TCGD48S21S2A
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #4

    Nov 21, 2009, 02:53 PM
    Do you know the approximate age of the furnace? It may be equipped with a status/diagnostic LED. If so, it will provide valuable clues as to the problem. Look for a small clear viewer disc on the front panel.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Turning on furnace fan [ 1 Answers ]

I recently installed an outside wood furnace,with the rad in my oil furnace. I would like to be able to turn the fan on upstairs with a switch or another thermostat. I currently have a honeywell ct51 thermostat with 2 wires. There is an auto and manual switch on this thermostat but only works with...

Electric furnace not turning on (NEW) [ 1 Answers ]

We just bought a new coleman electric down-draft furnace for our mobile home everything is wired according to the diagram, But it still will not turn on. Could there be a manufacture problem? Thank you Kathy Email: [email protected]

Fan/Furnace not turning on [ 5 Answers ]

Problem started last night. Before bed I went to turn the temp down on the thermostat. I got the clicking sound from the thermostat indicating that it was sending a connection to the fan. No fan turned on. I went above the desired temp and it clicked again. Back down below and again another click....

Furnace not turning on. [ 2 Answers ]

Hi there. New to this but here goes. I have a Rheem RGMC-125A propane furnace that is 24 years old. Never any problems till this winter. Is has a constant pilot flame. We lit the pilot and it works properly. When we turn on the thermostat, it clicks but nothing turns on. The burners do not...

Gas furnace not turning on [ 1 Answers ]

I've replaced the thermostat but my old one was so dated I couldn't see any significant number settings e.g. anticipator setting. What's that?


View more questions Search