Ask Experts Questions for FREE Help !
Ask
    eejordanvelasco's Avatar
    eejordanvelasco Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 18, 2014, 06:23 AM
    LED Wiring Compatibilty
    What will be the Wiring Diagram of this System?
    In a Normal Operation (supply coming from Dimmer Panel) LED Driver (Dimming) will supply the LED Fixture while the Emergency Driver will be from the Breaker so it will not be affected once the lamp are dimmed “off”. The Emergency Driver will Work only when all the Power are Out.
    We will use 2 LED Drivers (Dimming and Emergency) to Supply one LED Fixture.
    How we will integrate this? Is there any Relays or Diodes?

    Thanks

    Jordan

    What will be the Wiring Diagram of this System?
    In a Normal Operation (supply coming from Dimmer Panel) LED Driver (Dimming) will supply the LED Fixture while the Emergency Driver will be from the Breaker so it will not be affected once the lamp are dimmed “off”. The Emergency Driver will Work only when all the Power are Out.
    We will use 2 LED Drivers (Dimming and Emergency) to Supply one LED Fixture.
    How we will integrate this? Is there any Relays or Diodes?

    Thanks

    Jordan
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #2

    Sep 19, 2014, 04:24 AM
    Jordan - Why not take a look at Bodine or Iota emergency ballasts. Google wiring diagrams for the ballasts as that sounds like what your asking.
    If this is a design assignment from school, give this your best shot and ask us to check your work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dimmer wiring of LED office light fixtures [ 1 Answers ]

We want to add a dimmer to LED light fixtures on a single circuit. An electrician states the dimmer cannot simply be wired into the light switch panel. Each fixture must be individually wired to the dimmer switch. Is he correct, or is he trying to inflate the contract? Thanks.

My Lennox G40UH (X) Does Not Have Hot Air => 1st LED Flashes, 2nd LED Is On [ 3 Answers ]

Hello All Brothers, we really, really need your help. Our family live without heater almost a week. We both lost our jobs that is why we must wait until today. Here is the problem: Based on the diagnostic codes, 1st LED flashes, 2nd LED is On => Primary or secondary limit switches open. Here...

Wiring LED dimmer switch problem [ 9 Answers ]

Installing LED under counter lighting with dimmer switches - 1 switch for left of sink; one for right. Replacing previous switches that controlled all lights with R switch and disposal with L switch. Separated light wiring from R switch; removed disposal wiring completely. Have single hot, common...

Transfer Switch & Generator Compatibilty [ 3 Answers ]

I have installed a manual transfer switch in my home. It says in the instructions to make sure the neutral is un-bonded to the generator. My Generator has a bonded neutral to the frame. What can I do to make the switch and the Generator compatible? Thanks

NTFS Compatibilty Problems. [ 2 Answers ]

I have two networked Home edition computers. One with two drives is NTFS format, and the other with 3 drives in FAT 32 config. All the drives in FAT 32 format computer are accessible to the NTFS computer. All the drives in NTFS config are Access Denied for Program Files and Windows folder only....

View more questions Search