Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical Engineering (https://www.askmehelpdesk.com/forumdisplay.php?f=497)
-   -   LED Wiring Compatibilty (https://www.askmehelpdesk.com/showthread.php?t=801487)

  • Sep 18, 2014, 06:23 AM
    eejordanvelasco
    LED Wiring Compatibilty
    What will be the Wiring Diagram of this System?
    In a Normal Operation (supply coming from Dimmer Panel) LED Driver (Dimming) will supply the LED Fixture while the Emergency Driver will be from the Breaker so it will not be affected once the lamp are dimmed “off”. The Emergency Driver will Work only when all the Power are Out.
    We will use 2 LED Drivers (Dimming and Emergency) to Supply one LED Fixture.
    How we will integrate this? Is there any Relays or Diodes?

    Thanks

    Jordan

    What will be the Wiring Diagram of this System?
    In a Normal Operation (supply coming from Dimmer Panel) LED Driver (Dimming) will supply the LED Fixture while the Emergency Driver will be from the Breaker so it will not be affected once the lamp are dimmed “off”. The Emergency Driver will Work only when all the Power are Out.
    We will use 2 LED Drivers (Dimming and Emergency) to Supply one LED Fixture.
    How we will integrate this? Is there any Relays or Diodes?

    Thanks

    Jordan
  • Sep 19, 2014, 04:24 AM
    hfcarson
    Jordan - Why not take a look at Bodine or Iota emergency ballasts. Google wiring diagrams for the ballasts as that sounds like what your asking.
    If this is a design assignment from school, give this your best shot and ask us to check your work.

    • All times are GMT -7. The time now is 04:13 PM.