Ask Experts Questions for FREE Help !
Ask
    James Biller's Avatar
    James Biller Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2014, 07:43 PM
    93 ford ranger won't start. No clicks .
    New battery, Checked terminals . I don't know If it's the solenoid or wiring. I'm wounding if it could be the wiring between the solenoid and the fuel pump but I don't know . Don't really know anything about fords. Let me know what u guys think
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 18, 2014, 05:10 AM
    If the starter motor does not crank, check/replace the starter relay, likely located on the fender or firewall under the hood. Try cleaning the terminals/connectors first; if no joy, replace.
    TDHofstetter's Avatar
    TDHofstetter Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Aug 24, 2014, 07:33 PM
    Also check the negative (ground) cable from the battery to the block and to the sheet metal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Truck won't start battery has a full charge ford ranger 94 5 speed manual [ 3 Answers ]

2.3 engine solinoid relay on fender clicks when try to start low voltage

1994 ford ranger will not start? [ 1 Answers ]

I have a 1994 ford ranger v6, it was in a wreck and laid a little on its side. Now it will not start, it will fire up but not start, already hit the relay switch. Can Any one can help me with this?

My 1986ford ranger clicks once won't start. Lights come on. [ 2 Answers ]

It's my son's truck. A 1986 ranger. New ground wires didn't fix it. New starter, new solenoid. Clicks once but the starter won't do anything.

94 Ford Ranger won't start. [ 2 Answers ]

I have a 1994 Ford Ranger XLT 2.3 Liter. While driving a few days ago the engine stopped and would not start again. The next day I checked and one of the spark plug wires was split in half... don't know how! I replaced the wire and checked the others and the plugs, but it still won't start. ...

1994 Ford Ranger - won't start [ 1 Answers ]

I am having difficulty with my 94 Ford Ranger. I cannot start it at all. I have attempted to jump start and nothing is happening. I was able to push start successfully. I have to depress the clutch fully before the engine will start. I am wondering if there is a fuse, switch or something that...

View more questions Search