Ask Experts Questions for FREE Help !
Ask
    rstock's Avatar
    rstock Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2014, 02:02 PM
    My washer will not complete its wash cycle.
    My washer will start with the wash cycle but will not continue on to the next cycle.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 16, 2014, 02:47 AM
    You did not say what model you have. Here are some manuals: https://dl.dropboxusercontent.com/u/...%20washers.zip
    https://dl.dropboxusercontent.com/u/...c%20washer.pdf
    You may need a timer.
    paraclete's Avatar
    paraclete Posts: 2,706, Reputation: 173
    Ultra Member
    		  
    #3

    Aug 16, 2014, 05:35 AM
    Might be overloaded or not connected to the right tap
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Aug 16, 2014, 08:38 AM
    If one of the screens on the water inlet is stopped up, like the cold water, then if you have it set for warm wash it will work until it gets to rinse. Then it will stop. Take the hoses loose from the back and check the screens before doing anything else.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #5

    Aug 16, 2014, 09:14 AM
    Does it drain after the wash cycle?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool washer wtw4800XQ0 after wash cycle is complete leaves clothes still wet [ 1 Answers ]

Wtw4800xq0 model whirlpool leaves clothes too wet after wash cycle completely done. Darren

Complete wash cycle after reset sequence [ 0 Answers ]

Recently reset kenmore ultra wash dishwasher. Now it is not completing a wash and rinse cycle stuck in wash with eater not draining. Is there another reset cycle to get it to work properly?

My kenmore washing machine will not complete the wash cycle without slaming the lid [ 5 Answers ]

To get the washing machine to wash I most often have to slam the lid closed several times.

Washer machine will not complete entire cycle. It gets to the spin cycle, and stops. [ 1 Answers ]

I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely. Thank You

View more questions Search