My fan won't run when the thermostat is turned to the on position

Check out some similar questions!

My furnace fan won't run in the fan on position on the thermostat. [ 10 Answers ]

My furnace fan won't run in the fan on position on the thermostat. I don't know the model number but my furnace is a Trane high efficiency with variable speed DC motor about five or six years old. It seems to be working OK in the auto position. It's keeping the house warm but I have an HRV and...

The outside fan and compressor run even when the thermostat is turned off [ 1 Answers ]

I have a Trane 900 with heat pump. The outside unit still runs even when I turn thermostat off. I have to shut it off from the breaker. I put in a new Honeywell thermostat and it still does the same thing. What's wrong?

Programmable Thermostat - Fan won't run [ 1 Answers ]

We just installed a LuxPro Thermostat in our home but now the fan won't run. We always used to run the fan continuously with our old thermostat. With the new one the heat turns on when instructed but when it brings the house up to the correct temp. the whole things shuts off. We had the wiring...

Furnace/AC/fan won't run. No voltage to thermostat [ 1 Answers ]

I don't have any voltage to the thermostat. There is power to the control board. What do I check next?

Heat pump: fan does not run with fan set to 'on' position [ 3 Answers ]

I have a heat pump system and a programmable thermostat. The system runs fine, in heat or cool mode, with the fan set to 'auto'. It will not run (no fan) in heat or cool mode with the fan setting set to 'on'.

View more questions Search

Check out some similar questions!

Add your answer here.