Ask Experts Questions for FREE Help !
Ask
    srygley's Avatar
    srygley Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 3, 2014, 10:27 AM
    Need help with a odd bolt hole closet flange
    Bought a off brand toilet the rough in is 12" but the bolt holes are 14 1\2 " is there a specific flange to buy and where can I get it
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 3, 2014, 10:46 AM
    Easier to return the toilet and get a 12". Offset flanges work in a pinch but I do not like to use them as a normal install since you are adding another possible choke point.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Aug 3, 2014, 11:14 AM
    More details please! Brand name? Did the advertisement say 12" rough? If so return it. If not can you explain why you bought it? Back to you, Tom
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Aug 3, 2014, 01:14 PM
    I agree, return the toilet. Moving the flange to save a few dollars on a toilet just isn't worth it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to repair offset closet flange with broken bolt tabs [ 5 Answers ]

I have removed my toilet and found an offset flange with bolt slots on three sides and two small tabs on one side. I need to reset the toilet but the little bolt tabs are broken. How do I secure the bolt to the flange if there are no tabs? I have attached an image (I think, this is my first...

Installing closet flange where old flange top non existent [ 3 Answers ]

I am flooring in the basement bathroom and need to be able to set the toilet at a higher level. The flange part of the flange has been removed - there is now a pipe with the tubular part of the flange glued into it. How do I install a new flange with the appropriate extensions?

Hole in floor is larger than closet flange, and the flange may be too low [ 3 Answers ]

We recently put down ceramic tile in one of our bathrooms. A friend of ours did the job for almost nothing, as he had most of the required supplies left over from another job, including tile. Now there is water leaking from the base of the toilet. After scouring the DIY sites on the internet, I...

How do I attach closet flange spacer over old flange [ 1 Answers ]

I recently installed a new tile floor in my bathroom, and in doing so, raised the level of the floor. I went out and purchased a closet flange spacer kit and it came with the spacer and two rubber gaskets. I need to know how to attaché these. So I put the first gasket on, then the spacer, then do I...

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

View more questions Search