Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Touch up or repaint nickel plated sink drain hole edge inside sink
[ 2 Answers ]
A cleaner corroded the chrome off the new circle of chrome (nickel plated) at the bottom of the bathroom sink. Can we recoat with paint?
Sink drain leaking, even with water supply shutoff and sink empty
[ 0 Answers ]
My bathroom sink drain is leaking, I had planned on replacing the seals and washers under the sink, however this morning the leak got worse. This is almost a full day since water was shut off to sink and sink is empty. Why would this be? I am afraid if I undo the drain I am going to have water...
Relocating Sink Drain/Vent to Dedicated Stack Serving Kitchen Sink & Dishwasher
[ 3 Answers ]
I am relocating an upstairs vanity sink from one wall to another (also going from single to double bowl). Rather than relocate the drain and vent pipe, I am hoping that I can tie into a 1-1/2" copper vent pipe that is located right behind the vanities intended location. The copper vent pipe is from...
Hooking a Utility Sink in basement to Kithcen sink drain
[ 2 Answers ]
I'd like to install a utility sink in the basement and have attached a drawing illustrating the current piping and proposed attachment. Basically, the kitchen sink drain goes directly into a drain in the basement floor via a 1-1/2" steel pipe, which is tied to the sewer system. I'd like to put a...
Kitchen Sink/Laundry Sink Drain Vent Non-exist
[ 3 Answers ]
The set-up from kitchen sink leading down to drain to basement: 1. Kitchen sink - (R side) - connected to a P drain I think you call it -PVC-, connected to a "metal" T, which has a Studer vent gizmo attached to the top of it, then draining into a metal pipe straight down to the drain in the... View more questions Search
|