Ask Experts Questions for FREE Help !
Ask
    Sadienala's Avatar
    Sadienala Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2014, 06:22 PM
    Where can I find a clean out plug cap for old cast iron pipes
    The cap of my u shaped clean out access is stripped. It does not seal tightly causing constant dripping from the area. How can I fix the problem if a cap can't be located. Thank you
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 4, 2014, 08:33 PM
    Can you post a picture please?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jul 5, 2014, 05:00 AM
    Name: Recessed Brass Clean Out Cover.jpg Views: 2856 Size: 79.1 KBIs this what you're looking for? Let me know, Tom
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Jul 5, 2014, 06:12 AM
    If you are talking a whole house trap then the brass plug Speedball posted is available at most plumbing supply stores. If you have an odd size cleanout plug then you'll need to purchase a LEAD FIT-ALL plug (available at all plumbing wholesalers).


    Back to you...

    Mark
    Attached Images
     
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #5

    Jul 5, 2014, 08:54 AM
    The "U" shape threw me off? Maybe a trap?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #6

    Jul 5, 2014, 01:06 PM
    Yeah Brian,
    It does sound kind of like a sewer line trap.
    Attached Images
     
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #7

    Jul 5, 2014, 03:00 PM
    Guess we'll never know unless we get a better explanation or a pic.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there such thing as a Cast Iron sleeve to put into Cast Iron plumbing pipes? [ 8 Answers ]

Is there a Cast Iron sleeve to put inside Cast Iron plumbing pipes to keep them from rusting?

How to undo a cast iron iron plug ? [ 2 Answers ]

I am trying to remove a cast iron plug from a cast iron drainage clean out behind the bathroom in an 80-90 year old apartment building to unclog the drainage. The plug is so tightly set that despite heating with a torch and liberal applications of WD-40, use of a big pipe wrench and a lot of elbow...

Cast iron hub plug [ 3 Answers ]

I have 90 year old home with cast iron waste pipes. One 2nd floor bath sink gurgles, after cutting into wall behind sink I have cofirmed the obvious... sink isn't vented. The cast iron waste pipe rises 6" above the sink drain with a hub. This hub is filled with a very hard chocky white stuff. ...

How do I cap a pressurized basement floor cast iron drain? [ 4 Answers ]

I bought this house and in the basement is a 4 inch pipe that sits fairly level with the floor. It has a round piece of wood capping it. When it rains hard, this wood cap blows and I get a basement full of raw sewage. The neighor told me it's a cast iron pipe used for a toilet, but there is no...

Cast Iron Pipes [ 2 Answers ]

What is the best way to clear cast iron drain pipes as a step towards making future preventive maintenance cost effective and less labor intense? Is there a preferred cutter to use on a rooter machine that could accomplish this? Is there chemicals that are safe to use that can assist the process. I...

View more questions Search