Ask Experts Questions for FREE Help !
Ask
    pectiwita's Avatar
    pectiwita Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 29, 2014, 06:43 PM
    Weed eater WE261 riding mower
    My issue with the mower is that I was mowing grass on a level yard. All of a sudden the back tires stopped moving. So I got off the lawn mower and pulled it backwards. Then the wheels started moving again so I decided to continue cutting grass. The same issue happened once again. So I decided to load my lawn on my trailer to bring it home. By the time I got it home I was able to get it to roll off the trailer. I then started the mower to put it away in my shed. As I was backing up the mower it was moving slower than a snail. When I started moving forward the mower started shacking very badly. I tried figuring out the issue but have not found out what the issue is. I noticed that one of the outside brackets was a little bit bent & the bracket had a bearing inside. This is located on the back of the lawn mower. If you are sitting on the lawn mower it would be on the left side. It is attached to a shaft that is attached to the sprocket. The shaft moves up & down when using the clutch/brake.

Check out some similar questions!

Weed eater mower [ 1 Answers ]

The mower starts fine, usually on the first or second pull and after a few seconds starts to mis- fire (the best way I can describe it). I have cleaned the filter and changed the plug. It sees to run better without the filter being on i.e. hardly mis-fires. Is there something else that could be...

Weed Eater Mower Tractor [ 4 Answers ]

I have an old weed eater tractor. The model is 733-848. The carburetor was acting clogged up so I took it apart. I cleaned it all out and put it back together but it is still not working. It will fire up if you pour gas right down into the carburetor so I know its got to be a fuel problem...

Weed eater lawn mower [ 3 Answers ]

300 series won't start even though I used it 2 weeks ago. Is it the timing? If so,how do you time it?

Weed Eater riding mower belt replacement [ 2 Answers ]

Hi, My Weed Eater mower blade attachment belt broke. I bought a new one, the same size, but no matter how I wrap it through the pulleys it is either too short or too long. The attachment has five pulleys; one for each blade, the engine pulley and then two pulleys in the center. One of the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.